info@continentalcements.in
+91 94477 44042
HomeContinental Cement

Continental Cement

Continental Cement

Build your dream home on Solid foundation

Ultimate Strength

The minimum compressive strength of PPC after 28 days is 33mpa or 330kgs/cm2.

Ultra Fineness

Its ultra fineness makes more efficient in plastering and architectural work.

Better Bonding

A better bonding of the continental concrete makes the masonry much stronger.

Setting time

A better setting time makes the continental cement achieve greater later strength.

Superior Blended Cement

Continental Cement is Portland pozzolana cement (PPC) superior blended cement manufactured by grinding of high quality OPC with fine fly ash from selected electrostatic precipitator (ESP). It is extracted and transported through container to our factory to produce continental cement, with the selected raw material and the desired proportion.

We inter ground in a high efficiency manner to enable us to obtain high fineness and good particle size distribution (PSD). Strengthen quality measure and advanced inter grinding technology gives a fluid nature and superior bonding.

  • TEST REPORT OF CONTINENTAL CEMENT (PPC)
  • IS 1489:2015 (PART-1) FLYASH BASED

  • CHEMICAL COMPOSITIONS

    S.NO. PARTICULARS RESULTS OBTAINED AS PER IS 1489:2015 (PART-1)
    1 Loss on ignition, percent by mass –(LOI) 2.5% Not more than 5 %
    2 Insoluble residue- percent  by mass (IR) 29.8 % Addition Of Fly ash Percentage : 34 %
    3 Total sulphur content calculated as sulphuric anhydride –(SO3) 1.8 % Not more than 3.5 %
    4 Magnesia, percent  by mass –( MgO 2.4 % Not more than 6 %
    5 Chloride content, percent by mass. (Cl) 0.01 Not more than 0.05

    PHYSICAL PROPERTIES

    S.NO. PARTICULARS RESULTS OBTAINED AS PER IS 1489:2015 (PART-1)
    1 FINENESS 364 m2/kg Not less than 300M2/kg
    2 SOUNDNESS

    a. Le Chatilier
    b. Auto Clave

    		 1 mm
    0.032%    		 Not more than10mm
    Not more than 0.8 %
    3 SETTING TIME

    a. Initial Setting Time
    b. Final   Setting Time

    		 105 mts.
    195 mts.    		 Not less than 30 Mts.
    Not more than 600 Mts
    4 COMPRESSIVE STRENGT

    a. 3 Days
    b. 7 Days
    c. 28 Days

    		 20 Mpa
    31 Mpa
    42 Mpa    		 Not less than 16 Mpa
    Not less than 22 Mpa
    Not less than 33 Mpa
    5 Drying Shrinkage 0.01 % Not more than 0.15%

Comments are closed.